SkyRC iMAX B6AC Rapid Digital Li-Po And NiMH Battery Charger

SK-100008

Nouveau produit

The SkyRC iMAX B6AC is a professional intelligent dual power rapid battery charger with a digital 2 line LED display. The charger has the ability to correctly charge and discharge all current battery types including Li-Po and Ni-MH. You can use the included wall AC/DC plug adapter or a 12V power source to power up the iMAX B6A. 

Plus de détails

Ce produit n'est plus en stock

Aucun point de fidélité pour ce produit.


45,99 € TTC

En savoir plus

DETAILS

The iMAX B6AC balance charger is a fast charger with professional operating software. It is a high performance, microprocessor controlled, charge / discharge station with battery management for use with all current battery types including lithium polymer (Li-Po), lithium ferrum (LiFe), lithium ion (Li-Ion) and nickel metal hydride (Ni-MH) batteries. The iMAX B6AC can be powered from the mains or by a 12 Volt car battery.

Optimized operating software

The iMAX B6AC features an AUTO function that sets the feeding current during the process of charging or discharging. This is especially useful for lithium batteries as it can prevent them from overcharging which could lead to the battery damage. It will disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product are controlled through the bright LED display to achieve the maximum ease of use and minimize trouble. All the settings can be configured by you the user.

Internal independent lithium battery balancing

The iMAX B6AC employs an individual-cell-voltage balancer. It is not necessary to connect an external balancer for balance charging.

Balancing individual cells battery discharging

During the process of discharging, the iMAX B6AC can monitor and balance each cell of the battery individually. An error message will be shown and the process will be ended automatically if the voltage of any single one cell is sensed to be abnormal.

Adaptable to various type of lithium battery

The iMAX B6AC is adaptable to various types of Lithium batteries, such as Li-ion, LiPo and the new LiFe series of batteries.

Fast and storage mode of lithium battery

The purpose of charging a lithium battery varies: The ‘fast' charge reduces the duration of charging, whereas the 'store' charge can control the final voltage of your battery, so as to store charge for a long time and protect the life time of the battery.

Maximum safety

Delta-peak sensitivity: The automatic charge termination program based on the principle of the delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically.

Automatic charging current limit

You can set up the upper limit of the charging current when charging your NiCd or NiMH battery; it is useful for the NiMH battery of low impedance and capacity in the 'AUTO' charging mode.

Capacity limit

The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be automatically turned off.

Temperature threshold

The battery’s internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated.

Processing time limit:

You can also limit the maximum process time to avoid any possible defect.

Input power monitoring

To protect the 12V car battery (if used as the power input) from being damaged, the voltage is constantly being monitored. If it drops below the lower limit, the process will be ended automatically.

Data store/load

You can set a maximum of five battery charge profiles. You can keep the data connected to a program setting of the battery of continuous charging or discharging. You can use this data at any time without any special program setting.

Cyclic charging / discharging

1 to 5 cyclic and continuous processes of ‘charge to discharge’ or ‘discharge to charge’ is operable for battery refreshing and balancing to stimulate the battery's activity.

SPECIFICATIONS:

AC input: 100-240Volt

DC input: 11-18Volt

Circuit power: Max charge power 50W

Max discharge power: 5W

Charge current range: 0.1-5.0A

Discharge current range: 0.1-1.0A

Current drain for balancing Li-po: 300mA/cell

NiCd/NiMH battery cell count: 1-15cells

Li-ion/Polymer cell count: 1-6cells

Pb battery voltage: 2-20V

Net weight: 575g

Dimension: 135x144x36mm

ADDITIONAL INFORMATION

Battery Type Li-Po
For Battery Types Li-Po, Ni-MH
Max Voltage 25.80
Manufacturer SkyRC
SKU SK-100008

Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

SkyRC iMAX B6AC Rapid Digital Li-Po And NiMH Battery Charger

SkyRC iMAX B6AC Rapid Digital Li-Po And NiMH Battery Charger

The SkyRC iMAX B6AC is a professional intelligent dual power rapid battery charger with a digital 2 line LED display. The charger has the ability to correctly charge and discharge all current battery types including Li-Po and Ni-MH. You can use the included wall AC/DC plug adapter or a 12V power source to power up the iMAX B6A.